Friday, August 31, 2012

Engine stand

Way back in the mists of time, about 8 months ago, Bodger went mad and bought a few things of importance to use in the shed.

However since a shed is unavailable a garage is being used instead. Nevermind that my lad, what did ye buy way back them I hear you all yell?

One of the things obtained was an engine stand to mount the engine in while work is being done on it. Very nice you say, but what's that got to do with anything?????

Yesterday, some nuts and bolts and washers were bought, the electric drill was used and the stand was mounted on to a solid surface for when it's needed.

Have a look below and see for yourself.


The shelf thingy was rescued from the side of the road. The stand was bolted onto the top shelf to have it at eye level more or less. Leaves the second shelf to lay tools, mugs of tea or even parts on.

Plus there's holes in the sides of the supports that hooks are put into and helmets are hung from, outta the way and all in one place.

Not bad idea all in all.

Wednesday, August 22, 2012

Some work done

Surprisingly it's true.....

The past week or so Bodger has been slightly busy on the old nail.....errrr....Vicky.

Parts such as valve guides (just in case), a headlight shell, a complete crankshaft assembly, and a few other odds and sods to help the rebuild move along at slightly faster than a snails pace have been obtained.

The crank assembly is to replace the old one that looked like it had been submerged underwater longer than the Titanic. The replacement is in beautiful nick so should, fingers crossed, work a treat.

Today while off from work, the large nut that holds the sprocket in place behind the clutch was removed, the horn was cleaned up some, and in an attempt to remove a rusty external fork spring ended up unscrewing the fork slider from the holder thingy.

However, the other fork leg is being a little on the stubborn side so an attack of penetrating spray was launched to make the rusty threads give up the ghost.

But the good news is that the Allen head bolts that hold the damper rod in place were persuaded to give it up without too much difficulty. So now the damper rods can be taken out and work on the forks can begin.

All this in temperatures that reminds Bodger of three years spent in Tucson, Arizona...namely in the 100Fs for the most part, though today was cooler, only up to about 97F.

Also before it's completely forgotten about, two, not one, but two brand new t-shirts were added to the pile of clothing that passes for Bodgers wardrobe.

The shirt had nine panels featuring models from the Norton marque, old Nortons not the Gardner ones. The shirt was so nice, a second was bought!

Work and parts search still continues!!!!!!

Edit (8/23/2102)!!!!!!!!!!!

Some pictures of the newish parts:

Crank assembly

Headlight shell

Clutch assembly

The first picture is of the two crank assemblies, the old decrepit one on the right and the new one on the left.

The second is of the headlight shell which will need some work to get it back to a decent state. Get rid of some rust, replaace connections and whatever else and good as new.

The last picture is of an entire clutch assembly that was bought today off eBay for the princely sum of $102.

Monday, July 23, 2012

The things you see while out and about

After signing some papers at my attorneys office I happened to see these on the street corner.

After nearly getting whiplash from the double take and a fast turnaround, I managed to get some shots.

No info on them and no money in the account or the BSA would've been in the garage with the others.



Of the two, the BSA like I say would've been in my garage if the funds were available. Not fond of choppers though I do sort of like the look of a well designed and thought out bobber and except for a few things on it, the BSA looked good. Then again I could be just a little biased for some reason.

Thursday, July 19, 2012

Banbury's finest

Todays waffling will be about Banbury's finest and it's not the local constabulary.

Banbury in Oxfordshire is known for a few things, these being Banbury Cakes which is similar to an Eccles cake and is pretty tasty, Banbury Cross which is a monument that's smack dab in the middle of the road and forms a roundabout or traffic circle/rotary, and it's cattle market which at one time was the largest in Europe and then there's two motorcycle racers.




The Cross, cakes, etc can be Googled for more info if you like, the racers are Dan Shorey and Eddie Dow.

They both had dealerships in Banbury which unfortunately closed down back before Bodger became a part of the Banbury motorcycle scene back in the mid 70s.

Dan Shorey had his dealership up in North Bar which was a street in Banbury and there was a huge metal sign attached to the building wall that was still there as far as 1980 if I recall.


Shorey raced at the IoM and at Thruxton near Andover, Hants, partnering with one Mike Hailwood to win a race there, a 24 hour I think it was.

The other well known gent was Eddie Dow. he also raced at the IoM as well as in ISDT events and did well in all.


He's more notably known for his association with BSA Gold Stars and his improvements on another BSA model that was highly desirable.

There was one more in the Banbury area, living in the village and running, with her brother, the Three Tuns pub that Bodger at one time used to frequent from time to time.

This lady was the late Olga Kevelos who was quite well known and experienced on the trials circuit as well as other forms of two wheel sport plus a dabble in four wheel.

Besides being a publican and well versed in/on two wheels, Olga also had a very colorful life being a twice contestant on "Mastermind", a TV knowledge show as well as canal boat operator during WWII, hauling vital war supplies between cities.

I believe she was in a previous posting in this bloggy thing.

If you want to know more about them, Google them or check in Wikipedia for more info....you'll always be surprised at what you find, like Bodger is.